Podlahy pro byt, podlahy pro interiéry

Information line
+420 601 270 021

Chci se zeptat

New stairs - chips

  • Where to use?
    Staircases
  • Total price for order:
    from 490 CZK/m2.
  • Thickness:
    approx 2 mm

Surface preparation:
blasting, grinding

Surface priming:
methyl methacrylate (MMA) resin primer shaken with fine quartz sand

Surface:
smooth or anti-slip (the anti-slip properties are gained by application of quartz sand shakes followed by grinding, which allows for a fine, medium and coarse floor surface finish, depending on the specific requirements).

Bearing layer:
dyed methyl methacrylate (MMA) resin with quartz sand aggregates, which must be shaken over PVA chips immediately after application. After initial setting the loose chips are removed, the surface is lightly ground and sealed with a double or triple layer of UV resistant methyl methacrylate coating.

Base layer requirements:
The base layer must be dry, cohesive and clean, e.g. concrete, paving, anhydride, etc.

Humidity:
must not exceed 4%.

Temperature:
15 to 25 °C for application on a surface of similar temperature.

Colour:
according to the RAL chart

Application and curing:
surface priming 30 minutes, bearing layer 60 minutes, final sealing layer 30 minutes, full load possible in 3 hours

schody - povrchová úprava umělé teraco
schody - povrchová úprava umělé teraco
schody - povrchová úprava umělé teraco
schody - povrchová úprava umělé teraco
schody - povrchová úprava umělé teraco
schody - povrchová úprava umělé teraco
schody - povrchová úprava umělé teraco
schody - povrchová úprava umělé teraco
schody - povrchová úprava umělé teraco


Naši partneři:

Information line
+420 601 270 021

Links