Podlahy pro byt, podlahy pro interiéry

Information line
+420 601 270 021

Chci se zeptat

Betonflame - Marble floors

  • Where to use?
    Residential, office and commercial spaces
  • Total price for order
    from 1000 CZK / m2
  • Thickness
     approx 3 mm

Welcome to the dazzling world of joint-free flooring called "Betonflame". Designers, architects, or even home owners themselves have recently started turning their attention to simple building elements. By simple we mean square, minimalistic, reinforced concrete structures, combined with glass, wood or steel. It is in this area of modern living style where the cast polyurethane screeds find a wide range of applications. This type of floor surface finishes provides excellent wear and UV resistance and easy maintenance, which adds to their high value. Application of this technology enables the architects, project engineers and designers to create unique single or multicoloured combinations. Betonflame floors are applied mostly in residential spaces, but offer a wide range of uses in offices, commercial areas, hospitals, schools, residence facilities for senior citizens, etc Browse through our presentation and should you find it interesting, do not hesitate to contact us! We offer free consultation on a choice of technology suitable for your requirements and a free quote.

Surface preparation:
blasting, grinding

Surface priming:
The first primer layer is a transparent epoxy primer resin. The leveling layer is a transparent epoxy resin with quartz sand aggregate.

Surface:
smooth or anti-slip (the anti-slip properties are gained by application of quartz sand shakes followed by grinding, which allows for a fine, medium and coarse floor surface finish, depending on the specific requirements).

Bearing layer:
Two colour epoxy resin with quartz sand aggregate.

Final surface:
clear polyurethane hardfinish

Base layer requirements:
The base layer must be dry, cohesive and clean, e.g. concrete, paving, anhydride, etc.

Humidity:
must not exceed 4%

Air temperature:
15 to 25 °C for application on a surface of similar temperature.

Colour:
according to the RAL chart

Application and curing:
surface priming 12 to 24 hours depending on the temperature, bearing layer 12 to 24 hours, walking surface in 24 to 48 hours, full load possible within 7 days



Naši partneři:

Information line
+420 601 270 021

Links